Mikrotik R52H 802.11a/b/g Multiband High Power miniPCI Card. For special applications.
R52H is a wireless 802.11a+b+g miniPCI card for multiband high speed applications, with up to 350mW output power. It works on 2.192-2.539 and 4.920-6.100GHz frequency range and supports Turbo mode for faster transfers. The card performs best when coupled with the MikroTik RouterOS. R52H is optimized to work with MikroTik Nstreme protocol to reach extra long distances at a great speed. The Nstreme protocol is MikroTik proprietary wireless protocol created to overcome speed and distance limitations of IEEE 802.11 standards and to extend point-to-point and point-to-multi point wireless link performance.
Mfg P/N: R52H
Customers purchasing the Mikrotik 802.11a/b/g Multiband High Power miniPCI Card (R52H) should also consider purchasing:
RouterBOARD 433AH with Atheros 680Mhz (800MHz factory tested) CPU, 128MB RAM, three LAN, three MiniPCI, microSD slot, Voltage Monitor, Fan headers, NAND Storage with RouterOS Level 5 (AP support).
Ubiquiti NanoStation2 - 2.4 GHz Indoor/Outdoor CPE, US Plug, 802.11g. The Ultimate 2.4GHz CPE for the Global WISP Community Featuring Adaptive Antenna Polarity (AAP) Technology. The device designed to advance the Global Wireless ISP industry to the next level. Featuring a compact indoor/outdoor design and an interface so intuitive even the most technically challenged can instantly become experts. But, don't be fooled; it is as powerful as it is simple.
Nanostation packs some phenomenal performance with a revolutionary design combining a hi-gain 4 antenna system, advanced radio architecture, and highly researched and developed firmware technology allowing throughput, stability, and capacity performance rivaling even the highest-end WiMax networks.
Mikrotik R52 802.11a/b/g Multiband miniPCI Card. Works either on 2.312 - 2.497 or 4.920 - 6.100GHz range. Our customers have achieved 100km+ distances with this card.
Ubiquiti XtremeRange2 -2.4 GHz Embedded Wireless Mini-PCI Card, 802.11b/g 600mW. World's first Carrier Class WiFi Mini-PCI Radio Module 600mW Avg. TX Power and Integrated EMP/ESD Protection Circuitry. The XtremeRange series of radio modules by Ubiquiti leverages our strong knowledge and experience gained from customer interactions, field performance evaluations, and lab research; and improves upon the original and highly successful SuperRange series of high-performance 802.11 radio cards. The XtremeRange2 represents the first true carrierclass 802.11b/g-based 2.4GHz radio module specifically designed.
Tranzeo is pleased to announce our all new TR-CPQ Series 2.4 GHz products. A worthy successor to our popular CPE200 series, this powerful Clinet Adapter (CPE) features NAT Routing and QOS!
Tranzeo is pleased to announce our all new TR-5plus Series 5.3/5.4/5.8 GHz products. The TR-5Plus Series of radios are based on the TR-5A series but boasts a non-amplified radio that has an output power of 23dBm. Since there is no amplifier there is a lower cost and better performance in High Noise environments. This fully functional radio can be configured as an AP/CPE/PtP and comes with a N-Connector.
Ubiquiti Bullet2 - 2.4 GHz Antenna to Radio System Transformer Device, Outdoor 802.11b/g 100mW. Instantly Transform Any Antenna into a Carrier Class Radio System. Zero-Variable Wireless Infrastructure Deployment with four different models featuring up to 1000mW TX power.
No radio card / host board issues
No RF cable quality concerns
No mechanical stability concerns
No enclosure mounting requirements
Power supply / PoE injector sold seperately
Just Plug and Go! Bullet ships standard with the powerful and intuitive AirOS by Ubiquiti Networks. It also is supported by a Linux SDK to encourage open source development. The Bullet features a signal strength LED meter for antenna alignment, a low-loss integrated N-type RF connector, and a quick and robust weatherproof design.
Tranzeo 5 GHz 54 Mbps AP/CPE/PxP with 13dBm Output and 24dBi Integrated Panel (5 Miles). The TR-5a series is one of Tranzeo’s newer generation of 5.3/5.4/5.8 GHz product lines. Radios and systems are powered by a 13 dBm radio. These are integrated fully functioning radios, which means they can be configured as an Access Point, a Point -to-Point Bridge, or a Client Adapter (CPE). This unit has a 24dbi gain antenna and 13dBm radio output. It comes with an integrated directional panel antenna. The recommended PxP distance for this product is 5 miles. This product has QOS, bandwidth shaping, and is a 54 Mbps radio.